Solid-State Drive; Removing The 2230 Solid-State Drive In Ssd Slot One - Dell Alienware m15 R6 Service Manual

About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Solid-state drive

Removing the 2230 solid-state drive in SSD slot one

Prerequisites
1. Follow the procedure in
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the base cover.
About this task
NOTE: This procedure applies only to computers shipped with a 2230 solid-state drive installed in SSD slot one.
24
After working on your computer.
Before working inside your computer.