HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Figure 3-31 Connecting the composite cable to the TE40
Step 4 Install the pad to the camera base, as shown in
The composite cable connected to the TE40 must be placed in the groove of the cable trough on
the pad.
1.
2.
Issue 01 (2015-02-12)
NOTICE
Align the screws protruding from the pad with the holes at the bottom of the TE40, as shown
in step 1 in
Figure
3-32.
Fasten the recessed pan head screws, as shown in step 2 in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
3-32.
Figure
3 Installation
3-32.
36