Warranty And Liability; Duties Of The Plant Operator; Safety; Plant Operation - Beko DRYPOINT AC Series Installation And Operating Manual

Installation and operating manual

1.5.1. Warranty and liability

All warranty and liability for injury or damage to property shall be voided, if it is caused by:
• Improper use of the plant
• Incorrect installation, start-up, operation and maintenance of the plant
• Operation of the plant while it is obviously defective
• Non-compliance with the instructions in this document regarding transport, storage, installation, start-up and
maintenance of the plant
• Unauthorised modifications to the plant
• Insufficient inspection or monitoring of plant components that are subject to wear
• Incorrectly performed repairs
• Use of third-party components
Please also observe the general warranty terms and conditions of the manufacturer.

1.5.2. Duties of the plant operator

The plant operator must ensure that the plant is commissioned by personnel who are familiar with the relevant
safety instructions and trained in the operation of the plant. The instructions include in particular:

1.5.2.1. Safety

• Accident prevent regulations
• General and plant-specific safety instructions
• Safety devices of the plant
• Emergency procedures

1.5.2.2. Plant operation

• Proper procedures for plant commissioning and start-up
• Emergency procedures
• Plant shut-down

1.5.3. Duties of personnel

All persons who are involved in the operation of the plant must
• comply with the general occupational safety and accident prevention
• regulations and must have read the installation and operating manual.
• All instructions in this document must be strictly adhered to.

2. Product information

2.1. Scope of delivery

14
Figure
DRYPOINT
DRYPOINT AC 410 – 495 | DRYPOINT
®
Description
AC, complete
®
AC 410 – 495 MS
®
EN