Table of Contents
Advertisement
EN
1.5. Intended use
The DRYPOINT
M eco control drying system with integrated nanofilter and pressure dew point control is designed for the
®
filtration of aerosols and particles from compressed air and subsequent targeted drying of the air according to the individual
settings by the user.
The DRYPOINT
M eco control may only be operated for the intended purpose and within the specifications stated in the
®
technical data. Do not operate the unit with any substances or gas/vapour mixtures other than those listed above. Any other
use of this system, which exceeds the intended use, is hereby deemed to be improper and can cause a hazard for the safety
of people and the environment.
•
Operating the unit may only be executed within the permissible operating parameter limits (refer to technical data).
•
Working pressure is required for the proper functional operation.
•
The device is not suitable for operation in explosion hazard areas as well as in areas with aggressive atmospheres.
•
Do not operate the device with corrosive gases.
•
Strictly observe the prescribed storage and transport conditions.
•
The device is not suitable for use in conjunction with CO
In the case of applications in plants with increased requirements for compressed air quality (food industry, medical
technology, laboratory equipment or facilities, specialised processes etc.) the operator must decide on measures for the
monitoring of the compressed-air quality. These influence the safety for subsequent processes and can prevent injuries to
people and damage to plants and systems. It is the duty of the owner and/or operator to always comply with the stated
conditions during the entire operating time.
The product and the accessories have been exclusively designed for stationary use in a commercial or industrial area. All
the assembly, installation, operation, disassembly and disposal work described may only be performed by qualified skilled
technical personnel.
1.6. Warranty and liability for defects
All liability claims will be deemed to be invalid if the DRYPOINT M
intended use or is operated outside the specifications stated in the technical data; this particularly includes:
•
Technically incorrect installation, incorrect commissioning, incorrect maintenance or incorrect operation
•
Operation with defective components
•
Non-compliance with the instructions in this manual, in particular the safety instructions
•
Execution of constructive interventions or modifications on the device
•
Non-compliance with the prescribed maintenance intervals
•
Use of third-party spare parts that have not been approved by the manufacturer for repair and maintenance works
DRYPOINT
M eco control
®
systems.
²
eco control is not utilised in accordance with its
®
Installation and operating manual
7
Advertisement
Table of Contents
