Beko DRYPOINT AC Series Installation And Operating Manual page 22

Installation and operating manual
2.3.5.2.1. Table 1: First level (without SET button)
Current operation
Statistics
Action
Service messages
Alarm messages
22
Top line
Dewp. Control ↑ (↓) Dewpoint= xx °C
Adsorption Right Dewpoint= xx °C
Adsorption Left Dewpoint= xx °C
Regen. Right xx:xx/Rest xx:xx
Regen. Left xx:xx/Rest xx:xx
Operating time xxxxxx hrs.
Stand-By xxx:xx:xx hrs.
Oper. Time Ads. xxxxxx hrs.
Off-Line
Service A replace !
Service B replace !
Transmitter calibrate !
Safety Mode
Dew point alarm
Short Transmitter
Open Transmitter
Failure
Display texts
Bottom line with Bottom line with
dew point control
-------------------
xx:xx/Rest xx:xx
xx:xx/Rest xx:xx
xx:xx/Rest xx:xx
xx:xx/Rest xx:xx
xxxxxx hrs.
xxx:xx:xx hrs.
xxxxxx hrs.
replace !
replace !
DRYPOINT AC 410 – 495 | DRYPOINT
®
time control
Default display (after
10 min.)
Alternating right /
left
Alternating right /
left
Alternating right /
left
Alternating right /
left
Adsorbent operating
time
Plant switches to
"off-line" mode.
Only displayed, if
this function has
been triggered
(intermittent
operation).
Maximum service
life of wearing
parts reached (text
switches between
message and default
display).
Maximum service
life of adsorbent
reached (text
switches between
message and default
display).
Annual calibration of
dew point transmitter
due.
Safe mode operation
("fix mode").
Displayed, if alarm
has been triggered.
Dew point alarm
triggered.
Short circuit at dew
point transmitter
Transmitter circuit
open
Electrical failure
AC 410 – 495 MS
®
EN
Comment