Acknowledging Service Messages (Standard Version) - Beko DRYPOINT AC Series Installation And Operating Manual

EN

2.3.4.2. Acknowledging service messages (standard version)

Example: Service A (active)
Left adsorber LEDs are off
Go to service messages
DRYPOINT AC 410 – 495 | DRYPOINT
®
Acknowledgement
No button pressed
AC 410 – 495 MS
®
Installation and operating manual
Press and hold the button for 3
seconds; when the button is released
the service LED flashes briefly 3x
Service mode is terminated
automatically after 5 seconds
Service B (not active)
19