Table of Contents
Advertisement
US-EN
1.5. Intended use
The DRYPOINT
M intelligence drying system with integrated nanofilter and pressure dew point control is designed for the
®
removal of aerosols and particles from compressed air and subsequent downstream drying of the air, based on customer
settings.
Operate the DRYPOINT
M intelligence only for the intended purpose and within the limit range specified in the technical
®
data. Do not operate the unit with any media (fluids, gas/vapor mixtures) other than those listed above. Any other use of the
device is deemed improper and poses a risk to persons, property and the environment.
•
The unit must be operated within the permissible operating parameter limits (see technical data).
•
For proper operation, the air/gas to be treated must be at operating pressure.
•
The unit is not suitable for operation in potentially explosive or aggressive atmospheres.
•
Do not operate the unit to treat corrosive gases.
•
Strictly observe the prescribed storage and transport conditions.
•
The unit is not designed for use in conjunction with CO
With an application in systems with increased requirements for compressed air quality (food or foodstuff industry, medical
technology, laboratory equipment or facilities, specialised processes etc.) the operator must decide on measures for the
monitoring of the compressed-air quality. Such equipment might also help enhance the safety of the downstream processes,
preventing damage to persons and property. It is the task of the operator to ensure that the above conditions are met
during the entire operating time.
1.6. Warranty and liability
All liability claims shall be voided, if theDRYPOINT
or is operated outside the limits specified in the technical data. Improper operation includes especially:
•
Incorrect installation, commissioning or operation; insufficient maintenance
•
Operation with defective components
•
Non-compliance with the instructions in this document, in particular the safety instructions
•
Execution of construction related interactions or modifications of the device
•
Non-compliance with the prescribed maintenance intervals
•
Use of third-party spare parts that have not been approved by the manufacturer
DRYPOINT
M intelligence
®
systems.
²
M intelligence is used improperly, for a purpose other than the intended
®
Installation and operation instructions
7
Advertisement
Table of Contents
