Maintenance Schedule; Replacing Filter Elements - Beko DRYPOINT AC Series Installation And Operating Manual

EN

7.2. Maintenance schedule

The manufacturer recommends performing the following maintenance tasks within the prescribed maintenance
intervals.
DRYPOINT AC 410 – 495
®
Inspection
Service kit for service A
Service kit for service A
Calibration of dew point
transmitter

7.3. Replacing filter elements

1. Close all shut-off valves in the gas inlet and outlet lines.
2. Depressurise the BEKOMAT
3. Disconnect the BEKOMAT
1
1
DRYPOINT AC 410 – 495 | DRYPOINT
®
Type
Comment
Check/clean:
Condensate drain at prefilter
Silencers
Shuttle valves
Solenoid valve
Check:
Adsorbers, adsorbent
Dew point control
by pressing and holding the TEST button.
®
.
®
2
2
AC 410 – 495 MS
®
Installation and operating manual
X
X
X
X
3
1
2
37