Terms Of Use; Prescribed Use - Weidmuller Crimpfix 2.5 M Operating Manual

Stripping and crimping machine
1.

Terms of use

Please read carefully through this manual and observe the notes and explanations. Only by carefully following
these instructions the proper and trouble free operation of the Crimpfix 2.5 M machine can be guaranteed.
These operating instructions have been written with due care and attention. However, unless otherwise required
by law, we do not guarantee that the data, images and drawings are accurate or complete nor do we accept
liability for their contents. Weidmüller's general terms and conditions of sale apply in their respective valid form.
Subject to alteration without notice
2.

Prescribed use

This device is intended for use in applications only as described in the operating instructions. Any other form of
usage is not permitted and can lead to accidents or destruction of the device. Using the machine in non-
approved applications will lead immediately to the expiration of all guarantee and warranty claims on the part of
the operator against the manufacturer.
Using the selected machine for purposes other than those specified or failure to observe the operating
instructions and warning notes can lead to serious malfunctions that may result in personal injury or damage to
property.
Stripping of insulated wires according to
Cross-section
Feeding-length
Crimping of Weidmüller ferrules on reel with insulating collar:
Crimpform
The use of ferrules type H 0.34/12 is only possible with the 0.34 tooling set.
The indented use includes also the observance of all information in the operating manual and the compliance of
the maintenance work. (See chapter 10)
08-09-19-DK-Operating Manual_gb.doc / 2008-09-19
DIN VDE 0295/class 5
DIN VDE 0281/102
DIN VDE 0281/103
0.5 – 2.5 mm²
0.34 mm² optional
40 mm
H 0,34/12 optional
H 0,5/14
H 0,75/14
H 1,0/14
H 1,5/14
H 2,5/14
Trapez-Indent
Crimpfix 2.5 M
3