kd frames Charleston Headboard 7992-CH-F Instructions

Full

Instructions for

Charleston

Headboard

Full

sku# 7992-CH-F

Carefully align Headboard parts as

shown and press the Legs onto the

center section. You must make sure that

the rail pockets are aligned as shown.

Now turn the Headboard over and

secure the legs with (4) Wood Screws

(H-20).

Manufactured by

394 Dairy Pak Rd. • Athens, GA 30607

kdframes.com • alan@kdframes.com

N-7 HEADBOARD CENTER SECTION (1)

H A R D W A R E

H-2

3 - 1/2" BOLT

H-10 HEX WRENCH

H-20 1 - 1/2" WOOD SCREW

N-8 HEADBOARD LEG (2)

RAIL POCKETS

MUST ALL BE ON

SAME SIDE

WOOD SCREWS

GO HERE

L I S T

Table of Contents

Need help?

Do you have a question about the Charleston Headboard 7992-CH-F and is the answer not in the manual?

Page 1 H A R D W A R E L I S T Instructions for Manufactured by 3 - 1/2” BOLT H-10 HEX WRENCH Charleston H-20 1 - 1/2” WOOD SCREW 394 Dairy Pak Rd. • Athens, GA 30607 Headboard kdframes.com • alan@kdframes.com Full sku# 7992-CH-F N-8 HEADBOARD LEG (2)
Page 2 NOTE: Use (8) 3-1/2” Bolts (H-2) to attach If you prefer, you can leave off the In general, futon mattresses are a the Headboard over the Bed End. Bed End and just use the Headboard. little shorter that traditional Bolts should go through the (Use the 3”...