Attaching The Cable Assembly On The Machine Side; Connecting The Coolant - Abicor Binzel MIG Operating Instruction

6 Commissioning

6.3 Attaching the cable assembly on the machine side

1
11
1 Cable assembly
2 Coolant return hose
3 Coolant supply hose
4 Re-circulating cooling unit
(only with liquid-cooled torches)
Fig. 5 Mounting the hose assembly on the machine side
NOTICE
• Check once again whether the wire guide has been fastened correctly.
1 Combine central plug (10) and central socket (9) at the wire feed unit (8) and secure them
with the connecting nut (11).

6.4 Connecting the coolant

WARNING
Risk of burns
Welding torches will become overheated if the coolant level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTICE
• Ensure that the coolant supply and return hoses have been correctly installed. Coolant
supply = blue, coolant return = red.
• Do not use deionised or demineralised water as coolant or for leak and flow tests. This
may shorten your welding torch's service life.
EN - 14
2
10 9
5 Wire basket spool
6 Shielding gas cylinder
7 Power supply
8 Wire feed unit
3
8
9 Central socket
10 Central plug
11 Connection nut
MT/AUT/AUT RAB
4
5
6
7
BAL.0193.0 • 2018-07-31