Product Description; Technical Data - Abicor Binzel MIG Operating Instruction

MT/AUT/AUT RAB

3 Product description

WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).

3.1 Technical Data

Transport and storage
Relative humidity
Tab. 1 Ambient conditions during operation
Type of use
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN ISO 14175)
Wire types
Voltage rating
Protection type of the machine side connections
(EN 60 529)
Tab. 2 General torch data according to EN 60 974-7
Type Type of
cooling
dual
circiut
MT
452 W liquid
452 DW liquid
645 W liquid
Tab. 3 Product-specific torch data (EN 60 974-7) ABIMIG
BAL.0193.0 • 2018-07-31
Load
DC Impulse
CO M21 M21
2
A A A
500 500 325
450 450 300
650 600 450
- 25 °C to + 55°C
up to 90 % at 20 °C
automatic
DC
Usually positive
CO and mixed gas M21
2
commercially available round wires
141 V peak value
IP2X
Wire- 
Duty Gas
cycle flow
% mm l/min
100 1,0 - 1,6 10 - 20 50
100 1,0 - 1,6 10 - 20 50
100 1,0 - 1,6 10 - 20 50
®
MT
3 Product description
Cooling data
Supply flow flow
temp pressure
min. min. max.
°C l/min bar bar
1,0 2
1,0 2
1,0 2
3,5
3,5
3,5
EN - 5