Emergency Information; Product Description; Technical Data - Abicor Binzel ABIROB W Operating Instructions Manual

Welding torch system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
®
ABIROB
W

2.4 Emergency information

3 Product Description

3.1 Technical Data

Ambient temperature of welding
Transport and storage
Relative humidity
Tab. 1
Ambient temperature
Type of voltage
Polarity of the electrodes
Wire types
Tab. 2
General torch data according to EN 60 974-7
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in
slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to
the equipment.
In case of emergency, immediately disconnect the following supplies:
• Electrical power supply
• Compressed air supply
Further measures can be found in the operating instructions for the power
source or the documentation for other peripheral devices.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and
material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance
without authorization.
• Only qualified personnel are permitted to perform work on the device or
system.
3 Product Description
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC
Usually positive
commercially available round wires
EN - 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Abirob w300Abirob w500Abirob w50Abirob w600

Table of Contents