Do you have a question about the Trend 4500 and is the answer not in the manual?
Questions and answers
Владимир
May 17, 2025
Как начать работу с водонагревателем ,он подключен для всей квартиры
1 comments:
Mr. Anderson
May 22, 2025
To start using the THERMEx Trend 4500 water heater connected for the entire apartment:
1. Ensure Installation is Complete: - Confirm power cable is connected to the terminal block (L-N-GND from left to right for undersink installation). - All water connections must be properly attached.
2. Before Use After Prolonged Shutdown: - Fully heat the device to maximum temperature (tap at minimum flow). - Flush the pipes for one minute. - Check and clean the filter in the cold water inlet (blue).
3. Power On: - Switch on the main power supply.
4. Operation: - The device heats water instantly as it flows through. - Be aware that output temperature varies with the season (colder in winter due to lower inlet temperature).
Need help?
Do you have a question about the Trend 4500 and is the answer not in the manual?
Questions and answers
Как начать работу с водонагревателем ,он подключен для всей квартиры
To start using the THERMEx Trend 4500 water heater connected for the entire apartment:
1. Ensure Installation is Complete:
- Confirm power cable is connected to the terminal block (L-N-GND from left to right for undersink installation).
- All water connections must be properly attached.
2. Before Use After Prolonged Shutdown:
- Fully heat the device to maximum temperature (tap at minimum flow).
- Flush the pipes for one minute.
- Check and clean the filter in the cold water inlet (blue).
3. Power On:
- Switch on the main power supply.
4. Operation:
- The device heats water instantly as it flows through.
- Be aware that output temperature varies with the season (colder in winter due to lower inlet temperature).
Note: Do not use heated water as drinking water.
This answer is automatically generated