On Screen Display (Osd) Control Options - Elo TouchSystems 1939L User Manual

On Screen Display (OSD) Control Options

Control
Contrast
Brightness
V-Position
H-Position
Recall Defaults
RGB
Exit
Sharpness
Phase
Clock
OSD H-Position
OSD V-Position
OSD Time
Auto-Adjust
OSD Language
Information Description Indicates the current resolution, H-Frequency and V-Frequency.
3-20 User Guide
Description
Increases or decreases contrast.
Increases or decreases brightness.
Moves the screen up or down.
Moves the screen left or right.
Returns the monitor to its default settings.
Press or to select 9300, 6500, 5500, 7500 and USER. Only when
selecting USER can you make adjustments to the R/G/B content.
Press Enter to restore to factory default setting.
Exit the menu.
Adjusts the sharpness.
Increases or decreases the snow noise of the image after auto
adjustment is made.
The dot clock is fine-adjusted after auto adjust.
Moves the OSD position horizontally on the screen. When the
button is pressed, the OSD control menu will move to the right
side of the screen. Likewise, when the
OSD control menu will move to the left side.
Moves the OSD position vertically on the screen. When the
button is pressed, the OSD control menu will move to the top side
of the screen. Likewise, when the
control menu will move to the lower side.
Determines how long (in seconds) the OSD menu waits before
closing automatically after no action has been performed.
Press Auto to enable this function. The Auto-Adjust will automatically
adjust V-Position, H-Position, Clock and Clock-Phase.
Select from English, French, German, Spanish, and Japanese.
button is pressed, the
button is pressed, the OSD