Check Out Procedure; Operational Checks; Diagnostic Tests; Electrical Safety Checks - GE MAC 600 SPY Service Manual

Check out Procedure

Operational Checks

Diagnostic Tests

Electrical Safety Checks

Revision G
Maintenance: Check out Procedure
Perform the functional checkout procedures that are applicable to the
replacement procedure that was performed.
1. Verify the power-up self-test passed. See
page 3-3.
2. Verify the serial number restored successfully. See
Entry" on page 4-30.
3. For units with the option enabled, verify the option enabled again
successfully (Enabled options will have in front of the options in
option activation window). See MAC 600 Operators Manual for
"option entry" details.
4. Verify that the new battery was charged successfully by checking the
battery full indicator after it has been charged for 2-3 hours
charging. See MAC 600 Operator's Manual.
5. Verify the time and date were set successfully. See "Setting the date
and time" in the MAC 600 Operator's
1. Verify the System /Firmware Version was successful. See
the System Information"
2. Verify the Display Test was successful. See
page 3-7 for more information.
3. Verify the Buzzer Test was successful. See
page 3-8 for more information.
4. Verify the Keypad Test was successful. See
page 3-9 for more information.
5. Verify the Writer Tests was successful. See
11 for more information.
6. Verify the Battery Tests was successful. See
page 3-12 for more information.
7. Verify the Communication Tests was successful. See
"Communication Tests"
8. Verify the SD card test was successful. See
page 3-14 for more information.
1. Leakage current tests.
2. Ground continuity test.
TM
MAC 600
2047426-002
"Power-up Self-Test"
Manual.
on page 3-6 for more information.
"Testing the Display"
"Testing the Buzzer"
"Testing the Keypad"
"Writer Test"
"Battery Tests"
on page 3-12 for more information.
"SD Card Tests"
on
"Serial Number
"Testing
on
on
on
on page 3-
on
on
4-23