Options Menu - ResMed AutoSet CS 2 Clinician Manual

O M
PTIONS ENU
SETTINGS
enter
ALARMS
enter
RESULTS
enter
OPTIONS
enter
ADVANCED
enter
SERVICING
enter
S D
MART ATA
This function allows the clinician to turn on or off the patient's access to information
on Mask Fit, Average Pressure and Usage. The enabled parameters will appear in the
patient's Results menu. Additionally, if the AUTO APPEAR option is set to 'On', the
enabled screens will be displayed automatically on the LCD for 30 minutes after the
session is completed.
AVG PRESS displays the same value in the Smart Data and Efficacy Data menus.
N
OTE
F
ACTORY DEFAULTS
To return settings to their defaults, press the Left key ('reset') on the FACTORY
DEFAULTS screen. A message will ask you to confirm the command. To continue,
press the Left key again. A confirmation message is displayed for 3 seconds, then you
are returned to the Clinical menu standby screen. The settings will then be configured
as shown in the table "Factory Default settings" on page 16. As units are customised
according to region, these settings will override those initially received.
exit
exit
exit
exit
SMART DATA
LEAK: 0.40L/s
enter
exit
FACTORY DEFAULTS
reset
exit ERASE DATA?
yes
BACKLIGHT:AUTO
change
DATE:20JAN2002
change
TIME:16:54hrs
change
LANGUAGE:ENGLISH
change
MASK FIT:ON
exit
change exit
AVG PRESS:ON
change exit
USAGE:ON
change exit
AUTO APPEAR:ON
change exit
exit
exit
exit
exit
exit
exit
C
LINICAL
M
ENUS
13