Advertisement
First Start Up
1. Remove the protective film from the screen.
2. Turn on the ignition power.
3. Initially, the dash will display a Haltech logo
while it starts up. It will go to black briefly
before the main dash image appears.
4. After a few seconds, the dash will display the
default screen selected in the software, with
data from your Haltech ECU.
Haltech IC-7 Software
With this software you can change various
aspects of the dash behaviour including:
• Ranges of channels. Eg. the maximum RPM
on a needle style tacho or a bar graph.
• Red ranges for channels. Eg. when a numeric
display changes to red, red zone on a tacho.
• Display units. Eg. metric or imperial,
Lambda or AFR.
9
• The channel to be displayed at each location
on the screen.
• The connection method. Eg. Haltech CAN
or OBD-II.
• Shift light RPM points and colours.
• Alarm thresholds, colour for on-screen
display and shift lights, manual or auto reset
methods.
Installing the software
1. Insert the supplied USB Key into your PC. If
you have lost your USB key, you can download
the Haltech IC-7 software directly from the
"Downloads" section of the Haltech website.
2. If the window does not open automatically,
open My Computer and find the USB drive.
Double click on the USB drive.
3. Double click on the installer icon you see in
the root directory of the USB drive.
4. Once the Haltech IC-7 software is installed,
run the software.
5. With the the software opened, press F1 to
read the HELP file.
If you need help contact our Tech Support on:
Email: support@haltech.com
USA:
+1 888 298 8116
UK:
+44 121 285 6650
AUS:
+61 2 9729 0999
NZ:
+64 9 887 0616
Advertisement
