Osd(On Screen Display) Functions - Mitsubishi Diamond Scan 90E User Manual

4
4

OSD(On Screen Display) FUNCTIONS

(1) CONTRAST:
(2) BRIGHTNESS:
(3) COLOR-TEMPERATURE: Adjusts the color temperature of the screen image.
(4) INFORMATION: Indicate current Scanning frequency and input Video signal port
(5) H-SIZE (Horizontal Size): Controls the horizontal size of the image on the screen.
(6) H-PHASE (Horizontal Position): Controls the horizontal position of the image on the screen.
(7) V-SIZE (Vertical Size): Controls the vertical size of the image on the screen.
(8) V-POSITION (Vertical Position): Controls the vertical position of the image on the screen.
(9) SIDE-BOW (Pincushion or Bow Amplitude): Straightens the left and right sides of the screen
(10) KEY STONE:
(11) PIN-BALANCE: Adjusts the curvature of the left and right sides of the screen image.
(12) KEY-BALANCE: Adjusts the vertical slant or tilt of the screen image.
(13) H-MOIRE:
(14) V-MOIRE:
(15) ROTATION:
(16) GEOMETRY-RESET: Restore to factory preset following mode; H-SIZE, H-PHASE, V-SIZE, V-
(17) POWER-SAVE (ON/OFF): When adjusting ON, reduces the power consumption of the monitor when not
(18) VIDEO LEVEL:
(19) CLAMP-POSITION: Use this function to eliminate excessive green or white background that may
(20) USB PORT SELECT: Control upstream connection with using optional USB unit KT-X406.
Adjusts to the desired contrast level.
Adjusts to the black level of the screen.
(signal connector)
image.
Adjusts the parallelism of the left and right sides of the screen image.
Adjusts the horizontal moire level on the screen.
Adjusts the vertical moire level on the screen.
Adjusts the rotation or twist of the picture.
POSI, SIDE-BOW, KEY STONE, PIN-BALANCE, KEY-BALANCE.
in use.
Selects video levels 1.0V or 0.7V.
occur when both Sync-On-Green and external sync signals are applied to the
monitor.
16