Setup Menu - Mitsubishi Diamondview DV75UM User Manual

Setup Menu

Auto Adjust
H Position
V Position
Phase
Clock
Overscan
Power LED
OPS Power Down Check
Real Time Clock
Configure settings of Current Time and Timer Mode
Force the display to reacquire and lock to the input signal (VGA source only).
This is useful when the signal quality is marginal.
Options: No, Yes
Default: No
Adjust the horizontal position of the image (VGA source only). Press or to
select the desired level.
Range: 0~100
Default: 50
Adjust the vertical position of the image (VGA source only). Press or to select
the desired level.
Range: 0~100
Default: 50
Adjust the phase of the displayed signal (VGA source only). Press or to select
the desired level.
Range: 0~100
Adjust the clock of the displayed signal (VGA source only). Press or to select
the desired level.
Range: 0~100
Adjust the zoom (overscan) of the image
Range:0~10
Default: 0
Enable or disable the status LED
Options: On, Off
Default: On
Allow the display to skip waiting for the OPS module to power down when the
display is powering down
Default: On
Configure settings of Current Time and Timer Mode
See next page for details
27