Mitsubishi Diamondview DV75UM User Manual page 30

Adv. Setup Menu
Smart light control
IRFM
Wake Up from Sleep
DP1 Ver.
DP2 Ver.
EDID Setup
Factory Reset
Enable dynamic contrast (DCR) or ambient light sensor
Options: Off, DCR, Light Sensor; Default: Off
Creates slight frame motion to help avoid image retention.
Options: On
Default: Off
Select a source to wake up the display from sleep mode
Options: VGA Only, Digital, RS232, Ethernet, Never Sleep
Default: VGA Only
Select the DisplayPort version of the DP1 input
Options: 1.1, 1.2
Default: 1.2
Note: DisplayPort 1.2 is the more modern standard and supports 3840x2160 @
60 Hz resolution. However, sometimes DisplayPort 1.1 is needed for
compatibility with older graphics cards.
Select the DisplayPort version of the DP2 input
Options: 1.1, 1.2
Default: 1.2
Note: DisplayPort 1.2 is the more modern standard and supports 3840x2160 @
60 Hz resolution. However, sometimes DisplayPort 1.1 is needed for
compatibility with older graphics cards.
Select EDID (Extended Display Identification Data) of the HDMI and DisplayPort
inputs
Options: HDMI 1, HDMI2: 1080p, 4K2K 30Hz;
DP1, DP2, HDMI 3, HDMI 4 and OPS: 1080p, 4K2K 30Hz, 4K2K 60Hz.
Default: HDMI 1, HDMI2: 4K2K 30Hz;
Other inputs: 4K2K 60Hz.
Note: Use the 1080p setting for the broadest support of lower resolution sources.
Use the 4K2K setting to support high resolution sources such as 3840x2160.
Restores all settings to their default.
Options: No, Yes Default: No
30