Mitsubishi Diamondview DV75UM User Manual page 21

Source 2
Source 3
Source 4
PIP Size
PIP Position
Input Swap
Select the second source
Options: DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, HDMI4, VGA, OPS
Note: This function is only available when Multi-Source Views is set to PiP, Dual
View or Quad View. If HDMI4 was selected as another source, OPS cannot be
selected. If OPS was selected as another source, HDMI4 cannot be selected.
Select the third source
Options: DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, HDMI4, VGA, OPS
Note: This function is only available when Multi-Source Views is set to Quad View. If
HDMI4 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI4 cannot be selected.
Select the fourth source
Options: DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, HDMI4, VGA, OPS
Note: This function is only available when Multi-Source Views is set to Quad View. If
HDMI4 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI4 cannot be selected.
Select the size of the PiP (Picture-in-Picture)
Options: Small, Mid, Large
Note: This function is only available when Multi-Source Views is set to PiP.
Set the position of the PiP (Picture-in-Picture)
Options: TopR (Top Right), TopL (Top Left), BotR (Bottom Right), BotL (Bottom Left)
Note: This function is only available when Multi-Source Views is set to PiP.
Swap the Main Input source with Source 2
Note: This function is only available when Multi-Source Views is set to PiP or Dual
View.
21