Replacing Items - Removing/Opening Multiple Covers Required - TurboChef i5 Service Manual

A-12 APPENDIX - REPLACING OVEN COMPONENTS
Replacing Items - Removing/Opening Multiple Covers Required (Figures A-10, A-11)
DANGER: Before replacing any oven component, ensure the oven is removed from any power
source. Replacing a component while the oven is plugged in can result in serious injury or death.
CAUTION: Before removing/installing any component, make sure it is disconnected from the
wire harness (where applicable).
NOTE: Hardware listed is required for installing component to oven.
To remove the left side cover, see page A-9.
To remove the right side cover, see page A-11.
To open the top cover, see page A-5.
Figure
Item Description
Reference #
1 Hinge, Bracket, Slide, LHS
2 Hinge, Bracket, Slide, RHS
3 Hinge, Cam, Weldment, LHS
4 Hinge, Cam, Weldment, RHS
5 Hinge, Guide, Switch Slide, Lower
6 Hinge, Guide, Switch Slide, Upper
7 Hinge, Gusset, LHS
8 Hinge, Gusset, RHS
9 Hinge Module, Base
10 Hinge, Torsion Bar
11 Hinge, Weldmt, Ctrblnce Brkt, LHS I5-9326
12 Hinge, Weldmt, Ctrblnce Brkt, RHS I5-9327
13 Magnetron (Left)
14 Magnetron (Right)
15 Thermostat, Magnetron (Left)
16 Thermostat, Magnetron (Right)
17 Waveguide (Left)
18 Waveguide (Right)
19 Waveguide Gasket (Left)
20 Waveguide Gasket (Right)
Item Part Number Hardware Description
I5-9196 Nut, Keps, Hex, #8-32, Ext Tooth, Cres
I5-9195 Nut, Keps, Hex, #8-32, Ext Tooth, Cres
I5-9313 Washer, Nylon, Hingepin
I5-9314 Washer, Nylon, Hingepin
I5-9316 Screw, 10-32 x 3/8 lg, PFLH, 100 Deg, SS
I5-9315 Nut, Keps, Hex, #8-32, Ext Tooth, Cres
I5-9178 Nut, 1/4 - 20, Serr, Hex Flange, Plated Steel
I5-9179 Nut, 1/4 - 20, Serr, Hex Flange, Plated Steel
I5-9193 None
I5-9144 Spacer, Adjustment
Screw, 10-32 x 3/8 lg, PFLH, 100 Deg, SS
Screw, 10-32 x 3/8 lg, PFLH, 100 Deg, SS
NGC-3015 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH
NGC-3015 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH
102070 Screw, Sh Mtl, Drill Point, 6-32 x 3/8, PPHD, Zinc 101684 (qty 2)
102070 Screw, Sh Mtl, Drill Point, 6-32 x 3/8, PPHD, Zinc 101684 (qty 2)
I5-9330 Nut, Keps, Hex, #10-32, Ext Tooth, Cres
I5-9330 Nut, Keps, Hex, #10-32, Ext Tooth, Cres
I5-9331 None
I5-9331 None
Hardware Part Number(s)
102962 (qty 4)
102962 (qty 4)
C0504 (qty 1)
C0504 (qty 1)
101401 (qty 2)
102962 (qty 4)
100906 (qty 2)
100906 (qty 2)
None
Call TurboChef
101401 (qty 3)
101401 (qty 3)
101688 (qty 4)
101688 (qty 4)
102963 (qty 9)
102963 (qty 9)
None
None