Test Mode - Self Test; Test Mode - Manufacturing Mode; Microwave Leakage Test (How To Use Oven For Testing); Microwave Power Test - TurboChef i5 Service Manual

Turbo chef technologies rapid cook oven service manual
Hide thumbs Also See for i5:
Table of Contents

Advertisement

16
INFO MODE

Test Mode - Self Test

From
, press the R4 soft key to access the
TEST MODE
"Self Test" screen (Figure 15). From the "Self Test"
screen:
- L1 soft key initiates a comprehensive self test.
The oven will check the door switches, blowers,
magnetrons, and heaters in sequence.
- L2 soft key initiates a door switch test only.
- L3 soft key initiates a blower test only.
- L4 soft key initiates a magnetron test only.
- L5 soft key initiates a heater test only.
When each test completes, the oven will display
PASS or FAIL.

Test Mode - Manufacturing Mode

Press the R3 soft key to place the oven in
MANUFACTURING MODE
MANUFACTURING MODE
settings can be accessed:
- Microwave leakage test

- Microwave power test

L1
AUTO TEST
L2
DOOR TEST
L3
BLOWER TEST
L4
MAG TEST
HEATER TEST
L5
Figure 15: Self Test
L1
MW LEAK TEST
L2
MW POWER TEST
L3
BURN IN
SERIAL NUMBER EDIT
L4
FAHRENHEIT
L5
Figure 16: Manufacturing Mode
(Figure 16). When in
, the following tests and
SELF TEST
P S M t
H B T
W
MANUFACTURING MODE
SELF TEST
SETPOINT = 500F
ERASE/DEFAULT
- Burn in
- Serial number edit
- Temperature measurement (F or C)
- Self test (same as
- Erase/default oven settings
Microwave Leakage Test
Press the L1 soft key to initiate the microwave
leakage test. The oven will warm up to 500°F
(260°C). When warmup is complete, insert the
water load. Follow the steps on page 27.
Microwave Power Test
This test should only be performed by the
manufacturer.

Burn-In

Press the L3 soft key to initiate a 25-minute burn-in.
This feature helps ensure all cavity walls reach ther-
mal equilibrium before testing is conducted.
R1
L1
R2
L2
R3
L3
<
R4
L4
CANCEL
R5
L5
Figure 17: Serial Number Edit
L1
R1
L2
R2
ERASE COUNTERS
AND FAULT LOGS
L3
R3
L4
R4
L5
R5
Figure 18: Erase Settings
).
TEST MODE
SERIAL NUMBER EDIT
i 5 - D 1 0 0 0 1
_
>
SAVE
ERASE SETTINGS
COMPLETE ERASE
R1
R2
R3
R4
R5
R1
R2
R3
R4
R5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents