Inserting/Replacing The Batteries - Bosch Zamo Manual

tered, not reflective) and with in-
creased brightness of the laser point
to the ambient light intensity (interior
spaces, twilight). In unfavourable
conditions, e.g., with extreme interi-
or illumination or a badly reflecting
surface, the measuring range may be
limited.
 Note on measuring accuracy: In unfa-
vourable conditions, e.g. with extreme
interior illumination, a badly reflecting
surface, or room temperature deviat-
ing greatly from 25 °C, the maximum
deviation can be ±5 mm at 20.000 m.
In unfavourable conditions, a deviation
influence of ±0.05 mm/m must be tak-
en into account.
Assembly
Inserting/Replacing the
Batteries
Alkali-manganese batteries are recom-
mended for the measuring tool.
Insert the batteries (see illustration on
page 3). When inserting, pay attention
to the correct polarity according to the
representation on the inside of the bat-
tery compartment.
Bosch Power Tools
English | 25
1 609 92A 39C | (9.9.16)