Table of Contents
Advertisement
Quick Links
263HINT INTERNATIONAL
CELLULAR COMMUNICATOR
Installation Guide
SIM
CARD
65555
Figure 1: 263HINT
Cellular Communicator
DESCRIPTION
The 263HINT Cellular
Communicator provides a fully-
supervised alarm communication
path over the
HSPA+ network.
The 263HINT is installed in the
panel enclosure and powered
by the
panel so no additional enclosure,
power supply, or battery
back-up is needed.
The 263HINT is compatible
with XT30INT Series panels
and XR150INT/XR550INT
Series panels.
What is Included
•
One 263HINT Cellular
Communicator
•
One 383 Antenna
•
One PCB Standoff
•
One 381-2 18" Coax
Cable (263HINT/381-2
only)
•
One SIM Card
1
INSTALL THE 263HINT
Caution: Ground yourself by touching grounded
metal to discharge static before handling the
panel. Remove all AC and battery power from
the panel before installing or connecting any
modules, cards, or wires to the panel.
XT30INT Series Panel
1.
Insert the SIM card into the SIM card holder
on the 263HINT.
2.
Insert the PCB standoff end with flanges into
the standoff hole in the panel PCB.
3.
Hold the 263HINT at an angle and align the
SMA antenna connector with the antenna
hole in the top of the panel enclosure.
4.
Align the PCB standoff with the standoff
hole in the 263HINT.
5.
Line up the 263HINT card 12-pin connector
onto the Cell Module connector on the panel.
Caution: Make sure the 263HINT card 12-pin
connector is lined up to avoid damaging the
panel.
6.
Apply even pressure to both sides of the
board and push until the connector is fully
seated on the module.
7.
Attach the included antenna to the SMA
connector. See Figure 2.
Figure 2: Installing the 263HINT on an XT30INT
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DMP Electronics 263HINT
Summary of Contents for DMP Electronics 263HINT
- Page 1 PCB. The 263HINT Cellular Communicator provides a fully- Hold the 263HINT at an angle and align the supervised alarm communication SMA antenna connector with the antenna hole in the top of the panel enclosure.
- Page 2 Select the rate plan for the 263HINT. c. Select the Activate button at the bottom of the window. After the 263HINT is installed at the site, use a keypad and enter the panel's Diagnostics menu (2313). a. Select ACTIVATE CELL by pressing a top row Select Key.
- Page 3 TEST THE 263HINT The panels provide a diagnostics function to test the communication integrity and cellular signal strength of the 263HINT. To use diagnostics, reset the panel, enter the diagnostics code 2313 (DIAG) and press CMD for XR150INT/XR550INT Series panels or 231 and press CMD for XT30INT Series panels.
- Page 4 28 mA 387-3 3dB MEG Antenna Compatibility Ordering Information XT30INT Series panels 263HINT/381-2 International Cellular Communicator with 18" Coax Cable XR150INT/XR550INT Series panels 263HINT International Cellular Communicator Designed, engineered, and I N T R U S I O N • F I R E • A C C E S S • N E T W O R K S manufactured in Springfield, Missouri using U.S.
Need help?
Do you have a question about the 263HINT and is the answer not in the manual?
Questions and answers