DRY mode operation procedure
If room temp. is lower than set temp., compressor ,outdoor fan motors stop,indoor fan motors run at low speed. I f room
temp. is between 2
of set temp., Air conditioner is drying.I f room
temp. is higher than set temp., it's at COOL mode.
Set T EMP. should be in range of 16
3.Press SWING button,
the louvers start to rotate
automatically, and
stop when repress it.
4.Press T EMP.button,set
suitable T EMP.
2.Press MODE button,set
operation mode.
to 30
Function and Control
1.Plug in,press ON/OFF button,
then air conditioner is turned on.
13