Cleaning - Woods BATWING BW20.50QE Operator's Manual

A
Figure 11. Split Rim Tire Servicing
MAN1279 (15/04/2019)
PN 1006348

CLEANING

WARNING WARNING
• Never perform cleaning, servicing, or maintenance with engine running.
• Before cleaning, servicing, adjusting, repairing or unplugging: stop tractor
engine, place all controls in neutral, set park brake, remove ignition key,
and wait for all moving parts to stop.
After Each Use
• Remove large debris such as clumps of dirt, grass, crop residue, etc.
from machine.
• Inspect machine and replace worn or damaged parts.
• Replace any safety decals that are missing or not readable.
• Do not climb on machines or ladder to clean. Clean machine with wings
in lowered position only.
Periodically or Before Extended Storage
• Clean large debris such as clumps of dirt, grass, crop residue, etc. from
machine.
• Remove the remainder using a low-pressure water spray.
1. Be careful when spraying near scratched or torn safety decals or near
edges of decals as water spray can peel decal off surface.
2. Be careful when spraying near chipped or scratched paint as water
spray can lift paint.
3. If a pressure washer is used, follow the advice of the pressure washer
manufacturer.
• Inspect machine and replace worn or damaged parts.
• Sand down scratches and the edges of areas of missing paint and coat
with Woods spray paint of matching color (purchase from your Woods
dealer).
• Replace any safety decals that are missing or not readable (supplied free
by your Woods dealer). See Safety Decals section for location drawing.
Owner Service 19