Specifications; General Information - Woods BATWING BW20.50QE Operator's Manual

Cutting Height (Varies with tire selection)
Cutting Width
Overall Width
Transport Width
Tractor HP
Blade Spindle
Blade Overlap
Number of Blades
Blade Rotation
Input Driveline
CV
Side Frame Thickness
Weight (approximate kg with 8 large aircraft
tires, single chain shielding, and CV drive)
Tongue Weight (approximate kg)
Wheel Size
Torsion Protection
Blade Speed 1000 RPM
WARNING WARNING
 Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating and
maintaining your cutter. Read it carefully. It furnishes informa-
tion and instructions that will help you achieve years of
dependable performance. These instructions have been
compiled from extensive field experience and engineering
data. Some information may be general in nature due to
4 Introduction

SPECIFICATIONS

Left Spindle: CW; Right Spindle & Center: CCW

GENERAL INFORMATION

This Operator's Manual should be regarded as part of the machine.
Suppliers of both new and second-hand machines must make sure
that this manual is provided with the machine.
BW20.50Q BW20.60Q
50.8 mm - 381 mm (2 in - 15 in)
6096 mm (240 in)
6324.6 mm (249 in)
3124.2 mm (123 in)
70 - 200 70 - 300
3
152.4 mm (6 in)
6
Cat 5 Heavy
Cat 6
6.35 mm (1/4 in)
2918.8 kg 2882.1 kg
(6435 lb) (6354 lb)
1043.3 kg
(2300 lb)
737 mm Max
Slip Clutch
298.1 km/h (16,300 ft/min)
unknown and varying operating conditions. However, through
experience and these instructions, you should be able to
develop procedures suitable to your particular situation.
The illustrations and data used in this manual were current at
the time of printing but, due to possible inline production
changes, your machine may vary slightly in detail. We
reserve the right to redesign and change the machines as
may be necessary without notification.
Throughout this manual, references are made to right and left
directions. These are determined by standing behind the
equipment facing the direction of forward travel. Blade rota-
tion is clockwise (left wing) and counterclockwise (right wing
and centre section) as viewed from the top of the cutter.
BW20.70Q
70 - 300
3510.8 kg
(7740 lb)
1088.6 kg
(2400 lb)
MAN1279 (15/04/2019)