Cleaning - Woods BATWING BW20.61Q Operator's Manual

Rotary cutter
Hide thumbs Also See for BATWING BW20.61Q:
Table of Contents

Advertisement

A
Figure 11. Split Rim Tire Servicing
26 Owner Service
PN 1006348

CLEANING

WARNING
WARNING
 Never perform cleaning, servicing, or mainte-
nance with engine running.
 Before cleaning, servicing, adjusting, repairing,
or unplugging: stop tractor engine, place all con-
trols in neutral, set park brake, remove ignition key,
and wait for all moving parts to stop.
After Each Use
Remove large debris such as clumps of dirt, grass,
crop residue, etc. from machine.
Inspect machine and replace worn or damaged
parts.
Replace any safety decals that are missing or not
readable.
Do not climb on machine or ladder to clean. Clean
machine with wings in lowered position.
Periodically or Before Extended Storage
Clean large debris such as clumps of dirt, grass,
crop residue, etc. from machine.
Remove the remainder using a low-pressure water
spray.
1. Be careful when spraying near scratched or torn
safety decals or near edges of decals as water
spray can peel decal off surface.
2. Be careful when spraying near chipped or
scratched paint as water spray can lift paint.
3. If a pressure washer is used, follow the advice
of the pressure washer manufacturer.
Inspect machine and replace worn or damaged
parts.
Sand down scratches and the edges of areas of
missing paint and coat with Woods spray paint of
matching color (purchase from your Woods
dealer).
Replace any safety decals that are missing or not
readable (supplied free by your Woods dealer).
See Safety Decals section for location drawing.
MAN1282 (3/09/2020)

Advertisement

Table of Contents
loading

Table of Contents