Cleaning - Woods BW10.52 Operator's Manual

CLEANING

■ Wear long sleeves, long pants, boots, and
gloves when cleaning machine to avoid contact
with poisonous plants.
■ Wear safety glasses or goggles and a dust
mask. Use a leaf-blower, or broom to remove de-
bris without damaging decals, hoses or wiring.
After Each Use
• Remove large debris such as clumps of dirt,
grass, crop residue, etc. from machine.
• Inspect machine and replace worn or dam-
aged parts.
• Replace any safety decals that are missing
or not readable (supplied free by your Woods
dealer).
Periodically or Before Extended Storage
• Clean debris such as clumps of dirt, grass,
crop residue, etc. from machine and remove
buildup of grease, or oil.
• Remove the remainder using a low-pressure
water spray.
• Be careful when spraying near scratched or
torn safety decals or serial tag or near edges
of decals as water spray can peel decal off
surface.
• Be careful when spraying near chipped or
scratched paint as water spray can lift paint.
• If a pressure washer is used, follow the ad-
vice of the pressure washer manufacturer.
• Inspect machine and replace worn or dam-
aged parts.
• Sand down scratches and the edges of areas
of missing paint and coat with Woods spray
paint of matching color (purchase from your
Woods dealer).
• Replace any safety decals that are miss-
ing or not readable (supplied free by your
Woods dealer). See Safety & Instructional
Decals section for location drawing.
MAN1352
( 01/18/2024 )
MAN1352_2024-01.indd 27 MAN1352_2024-01.indd 27
CAUTION
Owner Service 27
1/19/24 1:05 PM 1/19/24 1:05 PM