Galvin Engineering Ezy-Drink Lead Safe 170.81.13.01 Installation Manuallines

Lead Safe™ Remote Push
®
Ezy-Drink
Button Drinking Tap
PRODUCT CODES:
- 170.81.13.01
SPECIFICATIONS

Drinking taps are designed to operate at full mains pressure.

The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.

Adjustable built-in flow restrictor.

Made from Lead Safe
IMPORTANT: All Ezy-Drink
our premises in good working order.
As 'lead free' is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA's Safe Drinking Water Act
(SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect to the wetted surface of
pipes, pipe fittings, plumbing fittings and fixtures".
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED

Power drill

Spanner or adjustable crescent

Screw driver
™ DR brass
®
remote bubbler taps are tested in accordance with AS/NZS 3718 and leave
th
Version 1, 12 March 2020 Page 1 of 4
½" BSP - Female
Rubber mouthguard
Push Button
Min 50
Max 500
Min 5
Max 60
1.7
Chrome