Pentair HPD200 Installation And Service Manual

Submersible positive displacement grinder pump

Table of Contents

Download this manual

MODELS HPD200–60 Hz and

HPDY200 – 50 Hz

SUBMERSIBLE POSITIVE

DISPLACEMENT GRINDER PUMP

INSTALLATION AND SERVICE MANUAL

NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible

party who maintains the system.

Table of Contents

Need help?

Do you have a question about the HPD200 and is the answer not in the manual?

Page 1 NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Item # E-03-428 | Part # 5625-428-1 | © 2013 Pentair Ltd. | 08/22/13...
Page 2 The cord grip forms a second seal around the molded cord end and GENERAL INFORMATION provides strain relief. This manual contains important information for the safe use of this product. Read this manual completely before using this product and Application: refer to it often for continued safe product use.
Page 3 001780061 Screw – Socket 05014A181 O-Ring Pump is noisy 145701001 Motor (1ø, 60 Hz – HPD200) 1. Defective bearings 145701011 Motor (1ø, 50 Hz – HPDY200) 2. No diametrical clearance between radial cutter and 145702011 Motor (3ø, 50 Hz – HPDY200)
Page 4 Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.

Hpdy200