Subscribe to Our Youtube Channel
Related Manuals for Pentair HYPRO 9700 Series
Summary of Contents for Pentair HYPRO 9700 Series
- Page 1 CLOSE-COUPLED AC MOTOR-DRIVEN & PEDESTAL MOUNT CENTRIFUGAL PUMPS 9940-9750NRL 9940-9751NRL INSTALLATION AND OPERATION MANUAL pentair.com...
- Page 2 Description Hypro's 9700 series pumps are specifically designed for bulk wide range of corrosion resistance. The close-coupled models transfer of fertilizer and agricultural chemicals. The pumps have are offered with 3/4 and 1 1/2 horsepower 115/208-230 volt centrifugal force impellers for quiet, efficient pumping action. AC motors.
- Page 3 General Safety Information (General Safety Information Continued) 17. Use only pipe, hose and fittings rated for the maximum psi 15. Check hose for weak or worn condition before each use. rating of the pump. Make certain that all connections are tightly secured. 18.
- Page 4 Drive Source Installation for the 9940-9750NRL Pedestal Mount Pump This manual covers the installation of the basic drive con- mation. Read all instructions and general safety information figuration for the 9940-9750NRL centrifugal pump. Consult before attempting to install or operate the pump. the manufacturer of your motor or engine for additional infor- Belt/Pulley Drive Installation Mounting Belts and Pulleys...
- Page 5 Installation 1. Position the pump as near as possible to the source being ment which may cause premature line failure or damage pumped. A flooded suction situation is preferred. The pump to the pump volute.) is not self-priming, therefore, if the fluid level is below the 4.
- Page 6 Repair Instructions Disassembly 1. Shut off the power to the motor before disconnecting 4. Place the slinger (rubber washer) over the motor shaft any electrical wiring from the back of the motor. and mount the body to the motor. 2. Disassemble the body-motor assembly from the volute. 5.
- Page 7 Models 9940-9750NRL, 9940-9751NRL and 9940-9753NRL • NOTES • NOTE: When ordering parts, give QUANTITY, PART NUMBER, DESCRIPTION, and COMPLETE MODEL NUMBER. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers. Model 9940-9750NRL Models 9940-9751NRL and 9940-9753NRL (Pedestal Mount)
- Page 8 Check with your shipping company for specific instructions. For a detailed list of where Pentair trademarks are registered, please visit www.pentair.com/en/registrations.html. Pentair trademarks and logos are owned by Pentair PLC. or its affiliates. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
Need help?
Do you have a question about the HYPRO 9700 Series and is the answer not in the manual?
Questions and answers