Page 1
Event Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Wiring the Data Logger 2 Device Operation 3 Device Maintenance 4 Need Help?
Page 2
PRODUCT USER GUIDE Product Overview Device Operation The Event101A offers an input range of up to 30 V, a Connecting and Starting the Data Logger reading rate of 4 Hz and a storage capacity of 825,753 1. Once the software is installed and running, plug the readings with ultra-high speed data download capability.
Page 3
LED Indicators Engineering units are used to convert one measurement Green LED blinks: 10 seconds to indicate reading to another. The MadgeTech software allows for logging and 15 seconds to indicate delay software level Engineering Units (conversion applied to start mode.
Page 4
NEED HELP? Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.