Advertisement
Quick Links
Description
Temperature Sensor
Temperature Range
Temperature Resolution
Temperature Accuracy
Humidity Sensor
Humidity Range
Humidity Resolution
Humidity Accuracy
Memory
Sample Rate
RH Units
%RH, dew pt., water vapor concentration (mg/ml)
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
Submergible
Material
Dimensions
2.25 in x 1.68 in dia. (57.15 mm x 42.67 mm)
Weight
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 60°C (140°F).
Specifications subject to change.
See MadgeTech's terms and conditions at www.madgetech.com
MadgeTech, Inc.
6 Warner Road
Phone 603.456.2011
www.madgetech.com
EggTemp-RH
Internal semiconductor
0 °C to +60 °C (+32 °F to +140 °F)
0.1 °C
±0.5 °C
Internal semiconductor
0 %RH to 95 %RH
0.5 %RH
+3.0 %RH
16,383/channel
2 seconds up to 12 hours
IFC102 or IFC202
38,400
1 year
0 °C to +60 °C (+32 °F to +140 °F),
0 %RH to 95 %RH (non-condensing)
No
Enclosure: HDPE
Logger: Stainless Steel
2.02 oz (60 g)
-
Warner, NH 03278
l
Fax 603.456.2012
l
info@madgetech.com
l
DOC12000035-00 REV 10 2015.03.13
Product User Guide
EggTemp-RH
Egg Temperature and Humidity Data Logger
EggTemp-RH
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.
Advertisement
Related Manuals for MadgeTech EggTemp-RH
Summary of Contents for MadgeTech EggTemp-RH
- Page 1 FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY Egg Temperature and Humidity Data Logger LEAK OR EXPLODE IF HEATED ABOVE 60°C (140°F). Specifications subject to change. See MadgeTech’s terms and conditions at www.madgetech.com MadgeTech, Inc. 6 Warner Road Warner, NH 03278 Phone 603.456.2011...
- Page 2 - IFC102 Recalibration Plug the serial cable into the port and verify it is secure. The EggTemp-RH standard calibration is one point at 25 °C and two points at 25 %RH and 75 - USB-1 or USB-101 %RH. Install the USB drivers from the USB Stick provided in the kit, then plug the USB cable into the computer and the serial cable into the serial port.
Need help?
Do you have a question about the EggTemp-RH and is the answer not in the manual?
Questions and answers