Download Print this page

MadgeTech Event101A Product Information Card

Event data logger with a 10 year battery life

Advertisement

Quick Links

Description
Input Range
Input Low
Input High
Internal Weak Pull-Up
Minimum Input Active (Low) Time
Resolution
Memory
406,323 events; software configurable memory wrap
Reading Rate
LED Indicator
Baud Rate
Battery Type
Battery Life
Time Accuracy
Required Interface Package
Operating Environment
Software
Dimensions
Weight
Material
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 80°C (176°F).
Specifications subject to change.
See MadgeTech's terms and conditions at www.madgetech.com
MadgeTech, Inc.
6 Warner Road
Phone 603.456.2011
www.madgetech.com
Event101A
0 V to 30 V
<0.4 V
>2.8 V
<60 μA
10 Microseconds
4Hz (reading rate selectable in software)
4Hz up to 1 reading every 24 hours
Red and Green
115,200
3.6V lithium battery included; user replaceable
10 years typical, dependent upon frequency
and duty cycle
±1 minute/month
(at 20 ºC/68 ºF, stand alone data logging)
IFC200
-40 °C to +80 °C (-40 °F to +176 °F),
0 %RH to 95 %RH (non-condensing)
XP SP3/Vista/Windows 7/Windows 8
1.4 in x 2.2 in x 0.6 in
(36 mm x 56 mm x 16 mm)
0.9 oz (24 g)
ABS plastic
CE
Warner, NH 03278
l
Fax 603.456.2012
l
info@madgetech.com
l
DOC 1223035-00 REV 6 2014.12.16
Product Information Card
Event101A
Event Data Logger with a 10 Year Battery Life
Event101A
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.

Advertisement

loading

Summary of Contents for MadgeTech Event101A

  • Page 1 LEAK OR EXPLODE IF HEATED ABOVE 80°C (176°F). Red 485 Dark Blue Pantone 289 Light Blue 58% of Pantone 289 Specifications subject to change. See MadgeTech’s terms and conditions at www.madgetech.com MadgeTech, Inc. 6 Warner Road Warner, NH 03278 Phone 603.456.2011 Fax 603.456.2012...
  • Page 2 - Once the software is installed and running, plug the interface cable into the data logger. The Event101A offers an input range of up to 30 V, a reading rate of 4 Hz and a storage - Connect the USB end of the interface cable into an open USB port on the computer.