Page 2
Contents 1 1 Preliminary note ....................2 1.1 Symbols used ....................2 2 Safety instructions ....................2 3 Function and features ..................3 4 Installation......................4 5 Electrical connection ....................4 6 Setting / Operation ....................5 1 Preliminary note 1.1 Symbols used ► Instruction > Reaction, result […] Designation of keys, buttons or indications →...
Page 3
• Read this document before setting up the product and keep it during the entire service life. • The product must be suitable for the corresponding applications and environ- mental conditions without any restrictions. • Only use the product for its intended purpose (→ Functions and features). •...
Page 4
Avoid static and dynamic overpressure exceeding the given overload pressure. Even if the bursting pressure is exceeded only for a short time the unit can be destroyed (danger of injuries)! If the cable length exceeds 30 m or if used outside buildings, there is a risk of overvoltage pulses from external sources.
Page 5
6: yellow LED: Set1 value reached, output = ON 7: sealing FPM / DIN 3869-14 8: internal thread M5 • To obtain the setting accuracy: Set the ring to the minimum value, then set the requested value. More information at www.ifm.com...
Need help?
Do you have a question about the PK55 Series and is the answer not in the manual?
Questions and answers