Advantage Controls GF with MegaTron XS Installation Maintenance Repair Manual page 16

>NOTEPAD SYS 1 NOTE 1<
NAME
NUMBER
UNITS
ALARMS
5.2 mA Inputs
>mA INPUT 1 CUSTOMIZE<
NAME
UNITS
NUMBER
5.4 Run Screen
This lets you customize various aspects of the RUN screen.
>RUN SCREEN<
MAIN SCREEN
SCREENS SHOWN
CYCLE TIME
COND UNITS
6. Alarms
>ALARMS<
SYS 1 ALARMS
7. Date and Time Set Up
>SET DATE AND TIMES<
SET DATE
SET TIME
SET DAY
SET WEEK
Friday May 14, 2005 03:04:56
NAME - Pick from a list of defined names or customize
your own.
NUMBER - Set the number range.
UNITS - Set the units of measurement.
ALARMS - Set Hi/Low alarm points and how frequently
a new value is expected to be manually enter via the
History menu.
NAME - Name the input.
UNITS - Set the units of measurement.
NUMBER - Set the number range.
MAIN SCREEN - Customize what is displayed on the
RUN screen.
SCREENS SHOWN - Pick if the mA input & Aux Flow
screens are scrolled.
CYCLE TIME - The amount of time between screen
scrolls.
COND UNITS - Select the units of measure to be
displayed with the conductivity reading.
ALARMS - Shows any current alarms.
DATE AND TIME - For setting the date, time, day and
week on the controller.
16