Advantage Controls MegaTron XS Quick Steps

Connecting to internet using a option "H" WiFi card
This guide is designed to help with connecting a
option "H" WiFi MegaTron XS / MT to the internet.

Getting Started:

Before going onsite, contact the Advantage
Controls' customer service
calling 918-686-6211 or visit our website at
http://www.advantagecontrols.com/downloads_other.php
and get the latest firmware version for the
MegaTron XS / MT.
firmware following our upgrade instructions.
Also, follow the supplied User ID Setup Quick
Steps if your Megatron is not already registered
with WebAdvantage.
Note: Screens may vary slightly between models.

Step 1:

Press Setup/Run, CONFIGURE, NETWORK,
WIFI.
(See figures 1, 2, 3 and 4.)

Step 2:

Use the UP/DOWN arrows to change USE WIFI
FOR WEB to ENABLE. Press Enter to accept.
(See figure 5.)

Step 3:

Press RESET and then press Enter to accept.
The communications card will reset after a short
countdown.
(See figures 6 and 7.)

Step 4:

After the communications card has been reset
cycle power to the controller.
department by
Update the controller
MegaTron Quick Steps
5
1
2
3
4
6
7