Installing the Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install the:
a)
PS2 and serial connector board
b)
hard drive
c)
cover
4. Follow the procedures in
System Board Layout
The following image displays the system board layout of the computer.
1. processor socket
2. processor fan connector
3. speaker connector
4. memory connectors ( SODIMM sockets)
5. WLAN connector
6. SATA HDD connector
7. coin-cell battery
8. PS2 and serial connector
Removing the System Board
1. Follow the procedures in
2. Remove the:
30
Extracción e instalación de componentes
After Working Inside Your
Computer.
Before Working Inside Your
Computer.