3. Perform the following steps as shown in the illustration:
a) Remove the screw that secures the cover to the computer [1].
b) Slide the cover outwards [2].
c) Lift the cover up to remove it from the computer [3].
Installing the Cover
1. Align the cover to its original position on the computer.
2. Tighten the screw to secure the cover to the computer.
3. Follow the procedures in
Removing the Processor Fan Module
1. Follow the procedures in
2. Remove the cover.
3. Perform the following steps as shown in the illustration:
a) Press the securing tabs on the sides [1].
b) Slide the processor fan module outwards [2].
c) Lift the processor fan module away from the computer [3].
After Working Inside Your
Computer.
Before Working Inside Your
Computer.
Extracción e instalación de componentes
23