System Setup Options - Dell OptiPlex 3020M Owner's Manual

Teclas Navegación
<Tab> Se desplaza a la siguiente área de enfoque.
<Esc> Se desplaza a la página anterior hasta que vea la pantalla principal. Si presiona la tecla <Esc> en la pantalla
principal, aparecerá un mensaje que le solicitará guardar los cambios y reiniciar el sistema.
<F1> Muestra el archivo de ayuda de System Setup (Configuración del sistema).

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear
Table 2. General
Option
System Information
Boot Sequence
Advanced Boot Options
Advance Boot Options
Date/Time
Table 3. System Configuration
Option
Integrated NIC
34 Configuración del sistema
NOTA: Solo para el explorador de gráficos estándar.
Description
Displays the following information:
• System Information - Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, Express Service Code, and Signed Firmware Update is
enabled.
• Memory Information - Displays Memory Installed, Memory Available, Memory Speed,
Memory Channels Mode, Memory Technology, DIMM 1 Size, and DIMM 2 Size.
• PCI Information - Displays SLOT1, SLOT2, SLOT3 (For MT chassis only), SLOT4 (For MT
chassis only)
• Processor Information - Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
• Device Information - Displays SATA-0, SATA-1, SATA-2(For MT chassis only), LOM MAC
Address, Audio Controller, Video Controller.
Allows you to specify the order in which the computer attempts to find an operating system. The
options are:
• Diskette drive
• Internal HDD
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
• Legacy
• UEFI
Enable Legacy Option ROMs - This option is required for legacy boot mode. This option is not
allowed if Secure Boot is enabled.
Allows you to set the date and time. The changes to the system date and time takes effect
immediately.
Description
Allows you to enable or disable the integrated network card. You can set the integrated NIC to:
• Enable UEFI Network Stack (disable by default)
• Disabled
• Enabled
• Enabled w/PXE- This option is enabled by default.
• Enabled w/Cloud Desktop
NOTE: Depending on the computer and the devices installed, the items listed in this
section may or may not appear.