a) Slide the power adapter case through the grooves at the bottom of the VESA mount to lock it.
b) Connect all the cables and install antenna to the computer.
Installing the Dell OptiPlex Micro Vertical Stand
Align the computer on the vertical stand and ensure the tab on the vertical stand fits into the groove or notch on the system.
Installing the Dell OptiPlex Micro Console with
DVD-RW
Recommended Screws:
1. Perform the following steps as shown in the illustration:
a) Loosen the screws that secure the cover to the optical drive console [1].
b) Slide and lift the cover upwards to remove it from the console [2].
Screw Type
ST4 x 13 mm, Wooden screw
Used in
Wooden table
Installing the Accessories
11