5. Tighten the screws to secure the arm stand to the dual VESA mount.
Installing the Dell OptiPlex Micro VESA Mount
Recommended Screws:
Prerequisite: Install the power adapter.
1. Perform the following steps as shown in the illustration:
a) Tighten the screws to secure the VESA mount to the table.
b) Slide the computer into the VESA mount [1].
c) Tighten the screw to secure the computer to the VESA mount [2].
2. Perform the following steps as shown in the illustration:
10
Installing the Accessories
Screw Type
M4 x L10 mm, Pan head screw
ST4 x L13 mm, Wooden screw
Used in
Monitor
Wooden table