Creative Structures Sound Blaster 16 Getting Started page 86

Question
Answer
No part of this publication may be reproduced or transmitted in any form or by any means without the
prior written consent of Creative Technology Ltd.
Copyright © 1997 by Creative Technology Ltd. All rights reserved.
Version 2.0
October 1997
Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks of
Microsoft Corporation.
All other products are trademarks or registered trademarks of their respective owners.
18
This manual downloaded from http://www.manualowl.com
My system hangs or reboots whenever I load CTCM.
What should I do?
The memory area of your PnP BIOS machine is
probably mapped by EMM386 using the HIGHSCAN
option and thus, can get corrupted easily. When it does,
CTCM will not work properly.
To solve this problem, remove the HIGHSCAN option
in the EMM386 statement in the CONFIG.SYS file.
For example, change the statement
DEVICE=<C:\dir>\EMM386.EXE HIGHSCAN
<other parameters>
to
DEVICE=<C:\dir>\EMM386.EXE
<other parameters>
where <C:\dir> is the directory in which your EMM386
program is installed and <other parameters> are the
other parameters in the EMM386 statement.