Understanding The Installation; Understanding The Software-Configurable Settings - Creative Structures Sound Blaster 16 Getting Started

Understanding the Installation

This appendix is organized as follows:

Understanding the Software-Configurable Settings

Understanding the Environment Variables
Understanding the Installation Program in Windows 3.1x
Understanding the Software-Configurable
Settings
Your audio card supports the Plug and Play (PnP) 1.0a standard. This
allows a PnP system to assign necessary resources such as I/O
addresses, interrupt lines and DMA channels to your card when you
install it.
If you are using Windows 95, this PnP operating system will
automatically set up your card's resources. If you are using a non-PnP
system such as Windows 3.1x, you must run a PnP configuration
manager to configure the card. For details, refer to the documentation
on your PnP configuration manager.
This section explains the following software-configurable resources of
your audio card:
Input/Output (I/O) Addresses
Interrupt Request (IRQ) Lines
Direct Memory Access (DMA) Channels
This manual downloaded from http://www.manualowl.com
A
Understanding the Installation A-1