Creative Structures Sound Blaster 16 Getting Started page 73

The CTCU command has two optional switches: /S and
/W=C:\<WINDOWS>. You can type it in the following way:
CTCU /S /W=<C:\WINDOWS>
where <C:\WINDOWS> is the directory where your Windows 3.1x
files are installed and the switches are as follows on the next page.
Parameter
/S
/W
The CTCU Interface
When you run CTCU in full-screen mode, you can pull down the menu
to select one of the following sections:
PnP Cards section
Legacy Cards section
System Devices section
PCI Devices section
You can use your mouse or keyboard to move around and select an
item or action in CTCU.
This manual downloaded from http://www.manualowl.com
Description
Notifies CTCU to run in silent mode. This
means that CTCU will not display any messages
or screens. It will simply update the parameters
required by the Creative drivers. If you do not
use the /S switch, CTCU will run in full-screen
mode (see Figure 1).
Informs CTCU to update the PnP hardware
information of your Windows drivers in the
SYSTEM.INI file. If you do not use this switch,
CTCU will prompt you to enter the name of the
directory where your Windows files can be
found.
5