Creative Structures Sound Blaster 16 Getting Started page 68

3. The remote party cannot hear you
If Creative Video Webphone always displays LISTEN, the remote
party's MIC volume is too high and/or their Voice Activation
Level is set incorrectly so their Creative Video Webphone cannot
detect silence and is constantly transmitting (not giving you an
opportunity to talk). If this is not the case and Creative Video
Webphone displays IN USE but never TALK when you speak into
the microphone, increase your MIC volume and check your Voice
Activation Level to verify Creative Video Webphone can detect
your voice. If Creative Video Webphone does display TALK
when you speak into the microphone and LISTEN when the
remote party speaks and the remote party still cannot hear you, the
remote party's speaker volume is probably not set correctly. Use
the TXT button to launch the Text Board and tell raise their
speaker volume.
For additional information, see the NetSpeak home page, at
http://www.netspeak.com.
No part of this publication may be reproduced or transmitted in any form or by any means without the prior
written consent of Creative Technology Ltd.
Copyright © 1997 by Creative Technology Ltd. All rights reserved.
Version 2.0
October 1997
Creative Video Webphone is a trademark of the NetSpeak Corporation.
Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.
Real Audio is a trademark of Progressive Networks.
Sound Blaster is a registered trademark of Creative Technology Ltd.
All other products are trademarks or registered trademarks of their respective owners.
This manual downloaded from http://www.manualowl.com