Creative Structures Sound Blaster 16 Getting Started page 33

6. In the Properties dialog box:
If you have an Original Configuration (Current) check box:
•
If you have a Disable In This Hardware Profile check box:
•
7. Click the OK button and restart Windows 95 for the change to
take effect.
After restarting Windows 95, ignore the information displayed
in the Resource Settings box on the Resources tabbed page of
the dialog box.
The only indicator that your interface has been disabled is the
cleared Original Configuration (Current) check box or the
selected Disable In This Hardware Profile check box.
When you re-enable the interface for use by another device,
Windows 95 might warn you that there is a conflicting device
or that the resource area associated with the interface is already
in use. Ignore this warning. The new device should function
perfectly despite the warning.
B-6 Changing Audio Card Settings
This manual downloaded from http://www.manualowl.com
To enable the interface, make sure that the check box is
selected.
To disable it, clear the check box.
To enable the interface, clear the check box.
To disable it, make sure that the check box is selected.